Stoves Harman P43 Pellet Stove

Harman P43 Pellet Stove

Harman's compact pellet stove: 18,783 to 33,252 BTU/hr and 77% HHV in its EPA listing, marketed with a 45,200 BTU/hr figure that is fuel input.

Pellet stove by Hearth & Home Technologies (Forge & Flame). Freestanding. EPA listing and maker documents checked October 21, 2026.

EPA-tested output 18,783–33,252 BTU/hr · 77% HHV · 1.8 g/hr

Key specs at a glance

Tested heat output

18,783–33,252 BTU/hr EPA

Low to high burn rate, wood pellets test

Advertised maximum

45,200 BTU/hr maker

1.36× the EPA maximum

Efficiency

77% EPA HHV

Maker: LHV 82.7%, HHV 76.7%

Advertised heating area

Up to 2,400 sq ft

14 BTU/hr of tested output per sq ft at the top figure

Particulate emissions

1.8 g/hr EPA

Limit 2.0 g/hr (pellet test)

Hopper

50 lb

Maker figure

Where to buy · Harman P43: Starting at $4,449 (maker estimate, before installation) on the maker's site (checked 2026-10-21). No retailer link yet.

Advertised vs EPA-Tested Output

BTU/hr. The advertised figure is "Heat output 45,200 BTU/hr"; input 23,900–45,200 BTU/hr in the spec table sourcechecked 2026-10-21 The EPA range is the tested low and high burn rate from the Harman P43-C listing (18,783–33,252 BTU/hr EPAchecked 2026-10-21 ). Why the numbers differ.

Our Read

Harman is the name pellet burners on hearth.com and r/PelletStoveTalk bring up for reliability, and the P43 is its compact freestanding model with a 50 lb hopper. Harman is now sold under Hearth & Home Technologies’ Forge & Flame site, which lists it as the Pathfinder P43.

The headline “heat output 45,200 BTU/hr” is the top of the fuel input range in the same page’s spec table, based on the feed rate times about 8,600 BTU per pound of pellets. EPA’s tested output is 18,783 to 33,252 BTU/hr at 77% HHV. Harman prints both LHV (82.7%) and HHV (76.7%) efficiency, which makes the gap easy to see once you know to look.

It’s also the most expensive stove here at a “starting at” estimate of $4,449 before venting and installation, and its 1.8 g/hr is high for a pellet stove.

Bottom line: A premium pellet stove with a well-labeled spec table and an input-based headline number. Size it on 33,000 BTU/hr, not 45,000.

Maker Claims vs the EPA Listing

Heat output: maker says

"Heat output 45,200 BTU/hr" at the top of the page Forge & Flame product page (Harman P43)

On file

The spec table lists 23,900–45,200 BTU/hr as input; EPA lists 18,783–33,252 BTU/hr output EPA listing

Our read

The headline number is fuel input, which the footnote calculates from the feed rate times about 8,600 BTU per pound. Tested output is 74% of it.

Efficiency: maker says

LHV 82.7%, HHV 76.7% Forge & Flame product page (Harman P43)

On file

77% HHV in the EPA listing EPA listing

Our read

Both figures shown and labeled. HHV matches EPA.

Heating area: maker says

Up to 2,400 sq ft Forge & Flame product page (Harman P43)

On file

33,252 BTU/hr tested maximum EPA listing

Our read

About 14 BTU/hr of tested output per square foot at the top of the range, one of the thinner ratios here.

EPA Certification Record

FieldEPA database value
ListingHarman P43-C
Appliance typePellet stove, non-catalytic
Test fuelWood Pellets
Heat output range18,783–33,252 BTU/hr
Efficiency (HHV)77%
Particulate emissions1.8 g/hr
Carbon monoxide1.866 g/min
Meets 2020 standardYes

From the EPA Certified Wood Heater Database export, checked 2026-10-21. Efficiency is the weighted average of the test burn rates on the higher heating value basis (HHV vs LHV). See every listing in our EPA database table.

Specifications (Maker Sources)

Heat

Advertised heat output
"Heat output 45,200 BTU/hr"; input 23,900–45,200 BTU/hr in the spec table Forge & Flame product page (Harman P43)checked 2026-10-21
Heating area
Up to 2,400 sq ft Forge & Flame product page (Harman P43)checked 2026-10-21
Efficiency
LHV 82.7%, HHV 76.7% Forge & Flame product page (Harman P43)checked 2026-10-21

Fuel & build

Hopper
50 lb Forge & Flame product page (Harman P43)checked 2026-10-21

Controls, emissions & price

List price
Starting at $4,449 (maker estimate, before installation) Forge & Flame product page (Harman P43)checked 2026-10-21

What We Haven't Checked

  • The maker page names the stove "Pathfinder P43"; the EPA listing is "Harman P43-C". We treat them as the same model line; the rating label on the stove settles it.
  • Real-world output in your house, which depends on wood moisture, chimney draft and how you run the stove. Nobody's lab number covers that.

Compare: Harman P43 vs PelPro PP130

Other stoves in the database:

Sizing a room? Run the heating and fuel cost calculator, or start with the best pellet stoves guide.